Prevents security problems through buffer overflows, if the operation system supports it and if it is activated.Įvery core can execute four complete commands simultaneously. Two processor cores run with the same frequency in the same processor building block and share the level 2 cache as well as the front side bus (FSB). Furthermore it supports the multimedia extension MMX, SSE2, SSE3 and SSE4. The Intel Core 2 Duo uses the x86 instruction set, which was introduced in 1978 with the 8086/8088 processor. Optional service upgrades are available through IBM ServicePacs®: 4-hour or 2-hour response time, 8 hours fix time, 1-year or 2-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software.The Core 2 Duo processors are produced in 65 nm (and later in 45nm), contain 14 stages pipelines and 2-4 MB level 2 cache (depending on the model).
Microsoft Windows Server 2008 R, Red Hat Enterprise Linux 5 and 6, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4.1 and VMware ESXi 4.1 embedded hypervisor, Sun Solaris 10.ģ-year customer-replaceable unit and onsite limited warranty with 9x5/next business day response time. Maximum resolution is 1280x1024 at 75 Hz with 16M colors. Matrox G200eV with 16 MB memory integrated into the IMM. Power-on password, administrator's password, Trusted Platform Module (TPM) Optional Virtual Media Key for remote presence (graphics, keyboard and mouse, virtual media). UEFI, IBM Integrated Management Module (IMM), Predictive Failure Analysis, Light Path Diagnostics, Automatic Server Restart, IBM Systems Director* and IBM Systems Director Active Energy Manager™, IBM ServerGuide. 675 W -48 V DC models are available via CTO.
Up to 2 redundant hot-swap 460 W AC or 675 W AC or 675 W high-efficiency (HE) AC power supplies with 90%+ efficiency. Altimeter is to control fan speed based on atmospheric pressure. IBM Calibrated Vectored Cooling™ with 3 counter-rotating hot swap fans with N+1 redundancy. One internal USB port for embedded hypervisor. Two USB 2.0, one DB-15 video, one DB-9 serial, one RJ-45 systems management, up to 4 RJ-45 network ports (2 standard, 2 optional) on rear. Two USB 2.0 and one DB-15 video on front. Up to 5 (up to 4 available, one slot is dedicated to RAID controller), dependant on the riser cards used (three different riser cards are available: 2x PCI-E x8 Gen 2, 1x PCI-E x16 Gen 2, and 2x PCI-X 64 bit/133 MHz).
Integrated 2 ports, plus 2 ports on optional Gigabit Ethernet with Ethernet Daughter Card (does not consume PCIe slot). If used, the maximum number of HDD bays is limited to 8.
Optional Tape Enablement Kit is available to support one DDS5, DDS6, or RDX internal tape drive.
Optional upgrade to RAID 6, 60 is available for M5014/M5015. Optional upgrade to RAID 5 is available for M1015. Up to 16 2.5" hot-swap SAS/SATA HDDs or solid-state drives. Up to 288 GB with 16 GB DDR3 RDIMMs and 18 populated DIMM slots (up to 144 GB with 9 DIMMs per processor), or up to 48 GB with 4 GB DDR3 UDIMMs and 12 populated DIMM slots (up to 24 GB with 6 DIMMs per processor).ĮCC, ChipKill (for x4-based memory DIMMs), memory mirroring, and memory sparing. Up to 18 DIMM sockets (9 DIMMs per processor).
Supports specific Quad-core and Dual-core Intel Xeon 5500 series processors via Configure-To-Order (CTO). Also supports the Intel Xeon X5698 4.4 GHz dual-core processor. Up to two six-core (up to 3.46 GHz) or quad-core (up to 3.6 GHz) Intel Xeon 5600 series processors with QuickPath Interconnect technology up to 6.4 GT/s, and up to 1333 MHz memory speed.